GMC Terrain, Equinox, and SRX Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
111 Posts
Could try a heat gun to heat them up a bit, may help loosening the adhesive. You could then run a piece of dental floss between the chrome and visor. Basically use a sawing motion back and forth to get through the adhesive. After that, goo gone or WD-40 to get the remaining residue off.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top