GMC Terrain, Equinox, and SRX Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
311 Posts
You need to make sure the very top part is in fully and flush before turning the bottome screws. If you don't it could come off. The little lips that attach to the bumper have be secured in place. You need to keep pressure on them (push up) so they stay when you swing the cover down to turn the screws. However if you don't even get the top ones flush it still should not fall off if the bottom screws are in and turned until they click. I had mine Denali for 3 years and near had a issue if I take my time to put it on.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top