GMC Terrain, Equinox, and SRX Forum banner
1 - 13 of 13 Posts

· Registered
Joined
·
137 Posts

· Registered
Joined
·
14 Posts
Discussion Starter · #4 ·
Thanks, I need to get them becuase on my 06 SS Impala they faded BADLY and i don't want that to happen on "The Nox"
 

· Registered
Joined
·
48 Posts
n08fear said:
Can anyone recomend a good aftermarket set of Chrome Pillar post for my 2010 2LT?
I recomend just don't get em. Step back and look how nice the tinted windows flow from rear to front with the chrome trim above. These chrome pillar covers cheapen the look of the car and break up the clan lines. I would recomend tiniting your drivers and passenger window to what is the closest tint keeping it legal! That will give the nix or terrain a better look!

Just my opinion. Good luck!
 

· Registered
Joined
·
14 Posts
Discussion Starter · #9 ·
The biggest reason why i wanted these is becasue my impalla that i had faded and cracked really bad and i did not want the samething to happed to my Nox!! I just got the windows tinted and i do like the look of no chrome, but i dont want the pilars to turn like they did on my Impalla! so if you have any suggestions rather than chrome let me know.
 

· Registered
Joined
·
48 Posts
n08fear said:
The biggest reason why i wanted these is becasue my impalla that i had faded and cracked really bad and i did not want the samething to happed to my Nox!! I just got the windows tinted and i do like the look of no chrome, but i dont want the pilars to turn like they did on my Impalla! so if you have any suggestions rather than chrome let me know.
just wax them often! Good luck and enjoy the new car !
 

· Registered
Joined
·
973 Posts
I got a set from ebay. They install on the door pillars and the trim on the rear vent window (6 pieces). Looks nice and the wife loves it. I was thinking about Ventvisors but would not want to hide the chrome. Uses 3M grey tape. They came packaged nicly and after you finish the install the chrome iscovered by tape you just peel off. I just put on a dash kit too. Dark Burl wood.
 

· Registered
Joined
·
297 Posts
I'd love to see a photo of your modifications, especially the new dash kit. ;D
 

· Registered
Joined
·
973 Posts
TheCrow1994 said:
I'd love to see a photo of your modifications, especially the new dash kit. ;D
I took some photos they are OK. The wife will have to download as she has a certain way she wants photos on the computer. So hopefully in a day or 2. Here is a link to B and I of the NOX who sell the kits http://www.bitrimdatabase.com/diagramview1_new_1.php?id=WD951A&db=FWD

The pillar kit is here. Same color as my Nox and looks the same (From B and I too) http://www.bitrimdatabase.com/diagramview1_new_1.php?id=PP1951&db=PP

You can get the kits in different colors. Look at the diagram at the site. No pieces are above the radio like they show in the piture. I have the one posted (Dark Burl). The B and I kits use 3M adhesive that does not require a hardner to be put on 1st. Just prep the area with Alcohol and lay on. When you have it in the right area then push down. The center piece around the radio and AC is tricky. The Sherwood dashkits are a little cheaper but you have to put hardner down 1st. Took me abiut 1 hour taking my time
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top