GMC Terrain, Equinox, and SRX Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Can you change the 1LT 2012 Nox to read Celsius instead of Fahrenheit on all the dash temp readings??

(I have been looking at them and did not see this setting anywhere.)
 

·
Registered
Joined
·
749 Posts
BE ADVISED: This will change EVERY reading in the car. Temp readouts, vehiclespeed measurement etc. EVERYTHING will be metric. Of coures you can always change it back.
Vehicle Information Menu:
Items
Press the MENU button until Vehicle
Information Menu is displayed.
Then press x to scroll through the
following menu items:
. Unit
. Tire Pressure
. Remaining Oil Life
. Blank Display
Unit
Press SET/CLR to enter the unit
menu. Then press ^ or v to
switch between METRIC or US
when the Unit display is active.
Press SET/CLR to confirm the
setting. This will change the
displays on the cluster and DIC to
either metric or English (US)
measurements.
 

·
Registered
Joined
·
332 Posts
Just as Phantm006 said!

I sometimes change the units back and forth to entertain myself on long drives. We us the metric system here and often I change it to US to see the total mileage drop on the odometer and the speed drop to MPH. Also it tells me what the temp is in °F so I can compare it to °C.

The unfortunate part is is brings my instantaneous fuel mileage number down as well so that looks a little worse.
 
1 - 3 of 3 Posts
Top