GMC Terrain, Equinox, and SRX Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter #1
Does anyone have or know where I can locate the information to safely remove the front bumper cover? I specifically have the 2020. I am missing some contact points and do not want to break anything.
 

·
Registered
Joined
·
1,308 Posts
Removal Procedure
Object ID: 4694739Click here for detailed picture of the image.
 1. Release the front 5 front wheelhouse opening molding retainers (1)  and reposition.
Object ID: 4677684Click here for detailed picture of the image.
 2. Underbody Front Air Deflector (1) » Reposition

Object ID: 5382949Click here for detailed picture of the image.
 3. Remove the 4 left side front wheelhouse bolts (1) and reposition the wheelhouse panel.
 4. Remove the 3 left side front tire front air deflector bolts (2) and reposition.
Object ID: 5382951Click here for detailed picture of the image.
 5. Remove the 4 right side front wheelhouse bolts (1) and reposition the wheelhouse panel.
 6. Remove the 3 right side front tire front air deflector bolts (2) and reposition.
Object ID: 4677688Click here for detailed picture of the image.
 7. Hood Secondary Latch Release Cable (2) » Remove — Hood Secondary Latch Release Cable Replacement

Object ID: 4677689Click here for detailed picture of the image.
 8. Front Grille Bolt (1) » Remove [6x]

Object ID: 4677691Click here for detailed picture of the image.
 9. Front Bumper Fascia Bolt (1) » Remove

Object ID: 4677692Click here for detailed picture of the image.
10. Carefully push a small nylon wedge between the fascia (1) and the fascia guide. Insert a small flat-bladed tool into the fasciaslot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia.
Object ID: 4677694Click here for detailed picture of the image.
11. With the aid of an assistant, remove the fascia. (1)
12. Disconnect all electrical connectors.
Installation Procedure
Object ID: 4677694Click here for detailed picture of the image.
 1. With the aid of an assistant, install the fascia.  (1)
 2. Connect the electrical connectors.

Object ID: 4677692Click here for detailed picture of the image.
 3. Secure the front bumper fascia (1) to the front bumper fascia guide.
Object ID: 4677691Click here for detailed picture of the image.


Caution: Refer to Fastener Caution.
 4. Front Bumper Fascia Bolt (1) » Install and tighten 2.5 Y (22 lb in)

Object ID: 4677689Click here for detailed picture of the image.
 5. Front Grille Bolt (1) » Install and tighten [6x] 2.5 Y (22 lb in)

Object ID: 4677688Click here for detailed picture of the image.
 6. Hood Secondary Latch Release Cable (2) » Remove — Hood Secondary Latch Release Cable Replacement

Object ID: 5382949Click here for detailed picture of the image.
 7. Install the 4 left side front wheelhouse bolts (1) and reposition the wheelhouse panel. Front Wheelhouse Liner Replacement - Left Side
 8. Install the 3 left side front tire front air deflector bolts (2) and reposition. Front Tire Front Air Deflector Replacement

Object ID: 5382951Click here for detailed picture of the image.
 9. Install the 4 right side front wheelhouse bolts (1) and reposition the wheelhouse panel. Front Wheelhouse Liner Replacement - Right Side
10. Install the 3 right side front tire front air deflector bolts (2) and reposition. Front Tire Front Air Deflector Replacement

Object ID: 4677684Click here for detailed picture of the image.
11. Underbody Front Air Deflector (1) » Install — Underbody Front Air Deflector Replacement

Object ID: 4694739Click here for detailed picture of the image.
12. Install the front 5 front wheelhouse opening molding retainers (1). Front Wheel Opening Molding Replacement
 
1 - 14 of 14 Posts
Top