[BlueScreenDesigns]

well it's not so much an issue as it is an annoyance. after doing reading on these forums (which i love btw), i notice the 2011 model as individual switches. my question is, is it possible to put the 2011 setup on my 2005?

 

[RIT333]

well it's not so much an issue as it is an annoyance. after doing reading on these forums (which i love btw), i notice the 2011 model as individual switches. my question is, is it possible to put the 2011 setup on my 2005?

Anything is possible - you'd have to buy the 2011 light assembly, and install - go for it ! I'm sure it'll be a few bucks.

 

[gar187er]

and nothing would fit, so youd have to chop up your interior.....

for what interior lights do you mean?

 

[BlueScreenDesigns]

i just hate how you turn on the switch and every single light comes on. i'm looking for the one in the back to have it own switch. i might i have to do something custom with it.

 

[gar187er]

you can wire an inline switch with the light....so that way the switch has to be in the on position for it to come on with the rest of the lights....

 

[BlueScreenDesigns]

very true. by any chance, do you know how the wires are ran up the front?

 

[gar187er]

to the rear light, dunno....never ripped my headliner down......i know the map lights just pull right out, they are only held in by a couple clips...the rears should be the same.....

if i had to guess its probably run down the passenger side with the rest of the wiring...if you pull out the passeneger side rear cargo tray (over the wheel well), or pull out the plastic trim on that side, youll see there is a TON of wiring down that side of the vehicle.....itd be a PITA to find/trace what wires you need....

 

[fourmoremarine]

Wires should be color coded pull down light and see what color wires are going to it one should be black(150)ground wire the other may be pink(131)