GMC Terrain, Equinox, and SRX Forum banner

2008 equinox injector problem

3K views 4 replies 5 participants last post by  hron61 
#1 ·
i have a 2008 equinox 3.4. its giving me code p0205 for injector 5 circuit open. problem is the injector is just staying wide open dumping fuel into exhaust. i switched wiring from injector 5 to injector 6 and then 6 sprays fuel nonstop. so i know it electrical problem. i traced the ground wire all the way back to the computer and didnt see any breaks or bare spots in wire. could this be a bad ecm? dont know what else to check. thanks in advance
 
#3 ·
I'm not sure but does ECM ground the injector to fire it or does it power it to fire it. If ECM grounds injector to fire it than a short to ground would keep injector flowing. As 13nox said electrical testing is needed.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top