Join Date: Jun 2017
Location: Lyndon, Vermont
Offsets are about 20mm different, (2008 'nox =45mm, 2011 Charger 24-25mm.) Charger wheels would likely hit outer body. As posted above, center hole would need centric rings since auto wheels index on center hole, NOT on lugs.
I don't know what you have in mind for wheel replacementparts, but if you use program I mentioned above and enter "must have" data (diameter, width, bolt pattern and center hole size), then put stock offset in matrix with +/- variable. Start at +/- 4mm, (less than 1/4"), and go from there. BTW, IMO, 20mm is way too far off.
Hope this makes sense and is some help.