Re: Installed New PDIM, enabled Bluetooth Streaming
tfors, I've got your back. I just got the module yesterday for about $100 with shipping from Amazon. (I chose overnight to make sure I could do it this weekend) I found a manual online which showed how to do the whole thing, usb ports, aux port new wiring harness and PDIM. Well, luckily I just need to do the PDIM.
I have a 2010 Chevy Equinox 2LT so it's got USB/Aux and NO nav, I looked for this years ago and found nothing so I was happy to see this post. Also, this is probably only for those that already have the USB/aux setup. Ok, now for what you want. You have to take ONLY the two drivers side panels off. The one right below the console in the shape of a triangle and the center console side panel. Again, left side ONLY. The don't unclip, so you just need to use a little force. It's more of a "plug" type clip so only force will remove it. The triangle piece is pretty tough to get off, now that I'm thinking about it maybe you don't even have to take that piece off. You'd only need to take it off if you couldn't get the left side center console piece off. The PDIM comes off when you undo the clips on the right side, you'll have to pull on it a little tough. The two cables will come off when you pull the smaller metal clip up a little and for the larger one the clip has to be pushed down and then pulled out. Look at the new PDIM and you'll see how the cables latch on.
My bad, I didn't get a picture of the left center console with the drivers side panel off.
Please see the pictures and it'll all make sense. Now, my phones connects to the car for phone and also a second time to gm music connect for streaming.