These are too sweet and would look amazing on my black 2010 Equinox Redline. Where did you get them and are they a long lasting colorway vinyl? Can you buy both left and right sides?
Replied to your PM
The stripe is something I made from vinyl stock purchased online from Amazon; vendor, 1060 Graphics. I bought a roll of red, and a roll of black, 3"wide and 60" long.
From that I cut three separate pieces, using a cutting board and a razor knife. One piece is 3", one 3/4" and one is 1" wide.
My plan was to emulate the stripes on the wheels in color, dimension, and angle.
There is also a 1/8" black vinyl pinstripe around the perimeter to accent the stripe.
I laid out the position and angle with painter's masking tape.
The vinyl parts were applied wet, one at a time, butted up to each other, and water squeegeed out and into position.
The pinstripe is applied dry, as it is easier to manage.
Hope that helps if you are thinking of something similar.
Now when I go out into a parking lot with dozens of other silver vehicles, I won't have to wonder which is mine.